HomePeptide dosagesThymosin Alpha-110 mg vial
Thymosin Alpha-1 10 mg vial: mixing and syringe units
A 10 mg vial of Thymosin Alpha-1 mixed with 2 mL of bacteriostatic water is 5 mg/mL. At that strength 1.5 mg is 30 units on a U-100 syringe and 1.6 mg is 32 units. The doses on this page are a reported range, not a label dose.
10 mg vial
Water 2 mL
Concentration 5 mg/mL
US Not approved
Canada Not authorized
Checked 10 Oct 2026Thymosin Alpha-1 10 mg draw chart
Each row is one dose, the volume to draw and where that sits on a U-100 insulin syringe. The last three columns show which syringe sizes can hold it in one draw.
| Dose | Volume | Syringe units | 0.3 mL syringe | 0.5 mL syringe | 1 mL syringe |
|---|---|---|---|---|---|
| 1.5 mg Reported low end | 0.30 mL | 30 units | Yes | Yes | Yes |
| 1.6 mg Zadaxin label (Italy) | 0.32 mL | 32 units | No | Yes | Yes |
Source The Italian Zadaxin label gives one 1.6 mg vial twice a week for four weeks. Reports describe 8 to 12 weeks. Not approved in the US or Canada. Vial math is arithmetic.
How to mix a 10 mg Thymosin Alpha-1 vial
- Wash your hands. Wipe the stopper of the Thymosin Alpha-1 vial and the water vial with an alcohol swab.
- Draw 2 mL of bacteriostatic water into a syringe.
- Push the needle through the stopper of the peptide vial and let the water run slowly down the glass, not straight onto the powder.
- Swirl the vial gently until the powder is gone. Do not shake it.
- Write the date and 5 mg/mL on the vial, then put it in the fridge.
If you add a different amount of water
More water makes each dose a bigger, easier draw. Less water makes it smaller. The milligrams in the vial do not change.
| Water added | Concentration | 1.5 mg | 1.6 mg |
|---|---|---|---|
| 1 mL | 10 mg/mL | 15 units | 16 units |
| 2 mL | 5 mg/mL | 30 units | 32 units |
| 3 mL | 3.3333 mg/mL | 45 units | 48 units |
The marked row is the amount used in the chart above. Red cells are draws under 5 units, which are hard to read, or over 100 units, which one 1 mL syringe cannot hold.
How many doses are in the vial
| Dose | Whole doses in a 10 mg vial | At twice weekly |
|---|---|---|
| 1.5 mg | 6 doses | 3 weeks |
| 1.6 mg | 6 doses | 3 weeks |
Thymosin Alpha-1 10 mg vial questions
How many units is 1.5 mg of Thymosin Alpha-1 from a 10 mg vial?
With 2 mL of bacteriostatic water the vial is 5 mg/mL. 1.5 mg is 0.30 mL, which is 30 units on a U-100 syringe.
How many units is 1.6 mg of Thymosin Alpha-1 from a 10 mg vial?
With 2 mL of bacteriostatic water the vial is 5 mg/mL. 1.6 mg is 0.32 mL, which is 32 units on a U-100 syringe.
How much bacteriostatic water goes in a 10 mg Thymosin Alpha-1 vial?
2 mL is the amount used on this page. It gives 5 mg/mL and puts the doses at 30, 32 units. Any amount works as long as the math is redone for it.
What if I added 1 mL instead of 2 mL?
The vial would be 10 mg/mL instead of 5 mg/mL, so 1.5 mg would be 15 units instead of 30. The dose in the syringe is the same; only the volume changes.
How many doses are in a 10 mg Thymosin Alpha-1 vial?
Whole doses in one vial: 6 at 1.5 mg, 6 at 1.6 mg.
More on Thymosin Alpha-1
This page is only the math for one vial size. Where the doses come from, what the studies found, the side effects and the sources are on the main page.
Thymosin Alpha-1 dosageWhat Thymosin Alpha-1 isHow to mix a vialHow to read a syringe
DosageFacts is an information site. It is not medical advice. Talk to a licensed professional before using any medication.