Skip to main content Skip to main content

Peptide Dosages | DosageFacts

Peptide dosage reference for the US and Canada
DOSAGEFACTS

HomePeptide dosagesSemaglutide2 mg vial

Semaglutide 2 mg vial: mixing and syringe units

A 2 mg vial of Semaglutide mixed with 1 mL of bacteriostatic water is 2 mg/mL. At that strength 0.25 mg is 12.5 units on a U-100 syringe and 1.7 mg is 85 units. The doses on this page are the schedule printed on the approved label.

Last checked 10 Oct 2026

2 mg vial

Water 1 mL

Concentration 2 mg/mL

US Approved, prescription

Canada Authorized, prescription

Checked 10 Oct 2026

Semaglutide 2 mg draw chart

Each row is one dose, the volume to draw and where that sits on a U-100 insulin syringe. The last three columns show which syringe sizes can hold it in one draw.

Semaglutide 2 mg vial with 1 mL of bacteriostatic water, 2 mg/mL. Once weekly.
DoseVolumeSyringe units0.3 mL syringe0.5 mL syringe1 mL syringe
0.25 mg Weeks 1 to 40.125 mL12.5 unitsYesYesYes
0.5 mg Weeks 5 to 80.25 mL25 unitsYesYesYes
1 mg Weeks 9 to 120.50 mL50 unitsNoYesYes
1.7 mg Weeks 13 to 160.85 mL85 unitsNoNoYes
2.4 mgMore than this vial holds

Source Schedule from the FDA label. The US label also allows up to 7.2 mg a week after 4 weeks on 2.4 mg. Vial math is arithmetic.

Open it in the calculator

How to mix a 2 mg Semaglutide vial

  1. Wash your hands. Wipe the stopper of the Semaglutide vial and the water vial with an alcohol swab.
  2. Draw 1 mL of bacteriostatic water into a syringe.
  3. Push the needle through the stopper of the peptide vial and let the water run slowly down the glass, not straight onto the powder.
  4. Swirl the vial gently until the powder is gone. Do not shake it.
  5. Write the date and 2 mg/mL on the vial, then put it in the fridge.

If you add a different amount of water

More water makes each dose a bigger, easier draw. Less water makes it smaller. The milligrams in the vial do not change.

Water addedConcentration0.25 mg0.5 mg1 mg1.7 mg
1 mL2 mg/mL12.5 units25 units50 units85 units
2 mL1 mg/mL25 units50 units100 units170 units
3 mL0.6667 mg/mL37.5 units75 units150 units255 units

The marked row is the amount used in the chart above. Red cells are draws under 5 units, which are hard to read, or over 100 units, which one 1 mL syringe cannot hold.

How many doses are in the vial

DoseWhole doses in a 2 mg vialAt once weekly
0.25 mg8 doses8 weeks
0.5 mg4 doses4 weeks
1 mg2 doses2 weeks
1.7 mg1 dose1 week

Semaglutide 2 mg vial questions

How many units is 0.25 mg of Semaglutide from a 2 mg vial?

With 1 mL of bacteriostatic water the vial is 2 mg/mL. 0.25 mg is 0.125 mL, which is 12.5 units on a U-100 syringe.

How many units is 0.5 mg of Semaglutide from a 2 mg vial?

With 1 mL of bacteriostatic water the vial is 2 mg/mL. 0.5 mg is 0.25 mL, which is 25 units on a U-100 syringe.

How many units is 1 mg of Semaglutide from a 2 mg vial?

With 1 mL of bacteriostatic water the vial is 2 mg/mL. 1 mg is 0.50 mL, which is 50 units on a U-100 syringe.

How much bacteriostatic water goes in a 2 mg Semaglutide vial?

1 mL is the amount used on this page. It gives 2 mg/mL and puts the doses at 12.5, 25, 50, 85 units. Any amount works as long as the math is redone for it.

What if I added 2 mL instead of 1 mL?

The vial would be 1 mg/mL instead of 2 mg/mL, so 0.25 mg would be 25 units instead of 12.5. The dose in the syringe is the same; only the volume changes.

How many doses are in a 2 mg Semaglutide vial?

Whole doses in one vial: 8 at 0.25 mg, 4 at 0.5 mg, 2 at 1 mg, 1 at 1.7 mg.

More on Semaglutide

This page is only the math for one vial size. Where the doses come from, what the studies found, the side effects and the sources are on the main page.

Semaglutide dosageSemaglutide 5 mg vialWhat Semaglutide isHow to mix a vialHow to read a syringe

DosageFacts is an information site. It is not medical advice. Talk to a licensed professional before using any medication.